Disaster Recovery  •  Agriculture  •  Forestry  •  Mining  •  Construction  •  Hospitals  •  Military  •  Social Services  •  Aviation  •  Fire and rescue  •  Utility companies  •  Marinas  •  Standby generators

Products | Fuel transfer equipment

Industrial pumps


YA-50-A belt driven high volume pump with ex-proof motor
  • Permitted fuels: Diesel, kerosene, petrol, biofuels, solvents and aviation fuels
  • Slide vane pump with internal adjustable by-pass
  • Inlet: 2" BSP
  • Output: 2" BSP
  • Flow rate: 300L/pm
  • RPM: 640
  • KW: 2.2
  • Volt: 380 3PH
  • Weight: 86kg
Submersible turbine pump with ex-proof motor
  • Permitted fuels: Diesel, kerosene, petrol
  • Built in check valve
  • By pass valve
  • Vacuum valve
  • Pump is designed to fit on 4” BSP thread
  • Inlet: 1½” BSP
  • Outlet: 2” BSP
  • Ex-proof: IP x 6
  • Flow rate: 200L/pm
  • RPM: 2820
  • KW: 1.1
  • Volt: 220
  • Weight: 41kg
SUB40 high volume vane pump
  • Permitted fuels: Diesel, kerosene, petrol, biofuels, solvents and aviation fuels
  • Slide vane pump with internal adjustable by-pass
  • Inlet: 40mm BSP
  • Outlet: 40mm BSP
  • Flow rate: 180L/pm
  • RPM: 960
  • KW: 1.5
  • Vacuum: 0.06 MPA
YA-50 high volume pump
  • Permitted fuels: Diesel, kerosene, petrol, biofuels, solvents and aviation fuels
  • Slide vane pump with internal adjustable by-pass
  • Inlet: 2” BSP
  • Outlet: 2” BSP
  • RPM: 400 - 640
  • KW: 2.2
  • KW: 1.5
  • Flow rates at different RPM
  • RPM: 650, flowrate: 300L/m
  • RPM: 600, flowrate: 270L/m
  • RPM: 550, flowrate: 240L/m
  • RPM: 500, flowrate: 210L/m
  • RPM: 500, flowrate: 210L/m
  • RPM: 400, flowrate: 150L/m
KCB 83 stainless steel gear oil pump
  • Permitted fuels: Oil, animal and vegetable oil, diesel, kerosene, biofuels
  • Transfer liquids up to 300 °C with a viscosity of 5 – 1500 Cst
  • Inlet: 1½”
  • Outlet: 1½”
  • RPM: 1420
  • KW: 2.2
  • Pressure: 0.33Mpa
  • Suction: 5m
  • Flow rate: 83L/min
ZCH 50A and ZCH 50B fuel dispenser gear pumps
  • Permitted fuels: Petrol, diesel, kerosene and gasohol
  • Air separator, by-pass valve, check valve and inlet filter are built in
  • RPM: 900
  • Pressure: 0.18 - 0.24Mpa
  • Vacuum: 0.04Mpa
  • Flow rate: 45 - 50L/min
ZYB 50a and ZYB 80A fuel dispenser vane pumps
  • Permitted fuels: Petrol, diesel, kerosene and gasohol
  • Air separator, by-pass valve, check valve and inlet filter are built in
  • RPM: 630
  • Pressure: 0.2Mpa
  • Vacuum: 0.054Mpa
  • Flow rate: 45 - 65L/min (ZYB 50a); 75 - 85l/MIN (ZYB 80A)
220V explosion proof motor
  • Type: Induction motor
  • Frequency: 50/60Hz
  • Output power: 750W
  • Protect feature: Explosion-proof
  • Phase: Single-phase
  • Certification: CE
  • AC Voltage: 208-230 / 240V
380V explosion proof motor
  • Type: Induction motor
  • Frequency: 50/60Hz
  • Output power: 750W
  • Protect feature: Explosion-proof
  • Phase: Three-phase
  • Certification: CE
  • AC Voltage: 380V
ZCP-50-B
  • Permitted fuels: Petrol, diesel, kerosene and gasohol
  • Air separator, by-pass valve, check valve and inlet filter are built in
  • RPM: 630
  • Pressure: 0.2Mpa
  • Vacuum: 0.054Mpa

Key features


  • SABS approved
  • Compliant with the safety standard of the National Road Traffic Act (Act 93/1996), including the regulations issued under this act
  • Ten sided, 600, 1100 and 1800 litre steel tanks
  • 50mm lockable fuel inlet, breather pipe and 25mm drain plug
  • Capacity to handle diesel, paraffin, Avgas, petrol, Jet A-1 and other fuel products that meet Class 3 combustible requirements

 

Contact


Telephone: +27 (0)58 813 1091

Email: info@jerrycar.com

Email: sales@jerrycar.com